Stone Sealer #6 is a more environmentally friendly version of Stone Sealer #5. The sealer is water based with no solvents or VOC and is non-toxic and nonflammable. It contains a reactive silicone polymer in a water emulsion that impregnates marble, granite, travertine, slate and limestone to form a “wet look” protective barrier. This is a combination sealer that offers both the qualities of Stone Sealer #2 and and an enhancer in a single bottle. This sealer is recommended for sale to both the general public and the stone fabricating industry.
Stone Sealer #6 will cover approximately 500 sf per gallon for each application and two coats are recommended approximately 2 hours apart rather than one thick coat. Do not over apply the sealer and any excess should be removed from the surface within 5 minutes using a clean dry white cloth. The natural stone surface should be kept completely dry while the sealer is curing for 24 hours. It can be applied either with a micro fiber cloth on small counter top or wall areas or with a short nap (1/8″) roller for larger floor areas. We recommend that a single top up application should be re-applied on top of the old sealer every 2 to 3 years.