Call us 9am-7pm (EST) at (423) 503-4490

Stone Sealer #1




Stone Sealer #1 is a reactive silicone polymer in odorless mineral spirits that impregnates the stone to form an invisible protective barrier. It produces a natural finish (no sheen) and does not alter the appearance of the stone surface. This sealer is a low odor solvent based product and is widely used by the professionals in the stone fabricating industry to seal all types of stone including marble, granite, travertine, slate and limestone.

Stone Sealer #1 will cover approximately 500 sf per gallon for each application and two coats are recommended approximately 2 hours apart rather than one thick coat. Do not over apply the sealer and any excess should be removed from the surface within 5 minutes using a clean dry white cloth. The natural stone surface should be kept completely dry while the sealer is curing for 24 hours. It can be applied either with a micro fiber cloth on small counter top or wall areas or with a short nap (1/8″) roller for larger floor areas. We recommend that a single top up application should be re-applied on top of the old sealer every 2 to 3 years.