Description
Custom Colored Concrete Sealer X-5 produces a colored satin or semi-gloss finish. This enhances the appearance of all types of decorative, stained and stamped concrete pavers, concrete structures and aggregate driveways. For testing purposes, you can either order 4-ounce spray bottle samples or a full set of all 20 colors.
Colored Concrete Sealer X-5 is a special non-yellowing, UV-resistant acrylic copolymer blend. It protects the surface of the concrete making it repellent to water, freezing temperatures, sun, pollution and staining. This sealer is water-based, low odor and VOC Compliant.
Use Colored Concrete Sealer X-5 on all types of concrete to make it dustproof. It is particularly effective on exposed aggregate surfaces to reduce wear and to eliminate the problem of loose pebbles. It has also been proven as an effective anti-graffiti barrier helping to prevent paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
It is available in 20 colors as shown in the color chart below.
Application of Custom Colored Concrete Sealer X-5
The surface does not need any special pre-treatment but it must be water, oil and dust-free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds. If the water beads up, then use Eco Concrete Etcher prior to applying this sealer. The coverage rate is approximately 200 to 400 sf/gal/app depending on the concrete porosity and we recommend two coats rather than one thick coat. Application time between coats is 4 to 6 hours and allow to cure for 24 to 48 hours without rain. For slip resistance on smooth surfaces, we recommend that you add 1 to 2 packets of our Stone Grip to each 5 gallon pail.
Colored Concrete Sealer X-5 is a ready-to-use product and does not require the addition of an activator. Therefore, it does not have a limited pot life unlike some competitive products and it has a shelf life of at least six months.
