Concrete Sealers for Colored Pavers and Aggregate Driveways
We offer three different types of concrete sealers. Use them on all stamped and colored decorative pavers, bricks, clay tile, natural stones and aggregate concrete. In addition, they are ideally suited for driveways, walkways, patios and all types of paved areas. Use on both interior as well as exterior surfaces. They provide stain protection and prevent water intrusion. The difference between the three types of products is the visual effect that they leave on the concrete surface as follows;
Concrete Sealer X-3 is a penetrating sealer that provides a natural or invisible finish. It is water-based non-slip, non-yellowing and VOC compliant. Concrete Sealer X-3S is the solvent-based equivalent of this product.
Concrete Sealer X-4 is a topical coating that provides a gloss finish. It is water-based non-yellowing and VOC compliant. In areas where slippiness might be an issue then1 or 2 packets of Stone Grip can be added to each 5-gallon pail. Concrete Sealer X-4S is the solvent-based equivalent of this product.
Concrete Sealer X-5 is also a topical coating but is provides a semi-gloss or satin finish. Additionally, It is also water-based, non-yellowing and VOC compliant. In areas where slippiness might be an issue then1 or 2 packets of Stone Grip can be added to each 5-gallon pail. Concrete Sealer X-5S is the solvent-based equivalent of this product.
All of the above sealers are clear products, but, we do offer colored versions of all of the water-based sealers.
